Machinery and Equipment

If you would like to purchase any of the machinery or equipment below, please call us at 704.552.0046 or through our contact page.

Sell us your surplus machinery
Tech First Machinery Inc. will make an offer to buy your surplus machinery inventory or you may consign your inventory to us.


Bandag 5′ x 10′ Electric Autoclave, Rated 100 PSI – 300ᵒF. Nat’l. Board and CRN numbers.
Bandag-5x10-AA-Bsm Bandag-103-5x11asm Bandag-103-Asm
Extended autoclave shell length from 22 feet to 28 feet with retrofit – refurbish
After5x28-Extension-aftersm After
Extended autoclave shell length from 10′ to 19′
New Shell Section
Customer Inspection
NEW Electric Autoclave 84″ x 144″ working dimensions
Salisbury 5′ x 12′ electric autoclave, rated 90 PSI – 650 F.
IMG_0727sm IMG_0721sm
Electric Autoclaves sizes ranging from 5′ x 19 to 5′ x 22′, rated 90 PSI – 650 F.
Cedco-Salisbury-Bsm B-809-5sm 2314-1sm IMG_0702sm

Rubber Mills & Mixers

Stewart Bolling 8″ x 16″ Lab Mill, variable roll speeds and friction ratios, Dual Allispede 10 HP motor drives.
P1010882-150x150 P1010791-150x150 P1010883-150x150 p1010878-2-150x150
Reliable 6″ x 13″ Lab Mill, single speed motor, chrome rolls, complete rebuild in 2014
P1011501sm P1010885-2sm P1010887-2sm P1010886sm
Farrel 22″ x 60″ rubber mill, 150 HP motor, bull gear/pinion drive, unitized one-piece base, top cap design, chrome rolls.
tfsm tf2sm
Farrel size “B” Lab Banbury Mixer, 1.6 liters.
P1010867sm p1010858sm P1010860sm P1010862sm


NFM 4.50″ Rubber Extruder, vented barrel with 18:1 – L/D ratio, power roll feed, quick clamp head, 150 HP variable speed motor.
Extruder-003sm Extruder-001sm
Ensine 1.50″ Lab Rubber Extruder, 10:1 L/D ratio, variable speed motor drive.
P1010902sm P1010904sm P1010901sm P1010909sm

One – Used/Refurbished 2.50″ NRM Rubber Extruder, 10:1-L/D ratio, equipped with a threaded die head adapter.
NEW 20 HP AC induction motor, TEFC, 900 RPM – 460v /3/ 60. NEW control panel with a NEW Variable Speed Inverter Drive. SOLD
WEB-NRM-2.50csm WEB-NRM-2.50-bsm WEB-NRM-2.50-asm


Please check back at a later date


McNeil 32″ x 32″ – 400 ton mechanical molding presses
P1010869sm P1010871sm P1010870sm
Southwark 4 – post hydraulic molding press – SOLD
Used EEMCO 18″ x 18″ 4-post press, rated 100 tons @ 2,000 psi line pressure, 12″ diameter ram, (2) – 18″ x 18″ electric platens, (1) – 8″daylight opening that is adjustable to 22″ daylight with full ram stroke. Click on any image for a larger view.
P1011262sm P1011260sm P1011257sm
Carver 12 ton 4-post lab press, 12″ x 12″ electric heated platens with cooling.
Carver-Lab-Press-Dsm Carver-Lab-Press-Asm Carver-Press-Csm

Modern hydraulic coining press, 50 tons, 12″ x 12″, no platens. Click on any image for a larger view.

Modern-Coining-Press-Asm Modern-Coining-Press-Bsm

Moline-Williams & White 4-post hydraulic press, 530 tons, 100″ L-R x 52″ F-B, hydraulic system. Click on any image for a larger view.



Gear Reducers – FARREL® Model DR-39 Gear Reducer, Order # 66A2115, Service HP – 200, Catalog HP – 340, Input RPM – 1200, Output RPM – 47, Ratio – 25.29:1, SF – 1.7

P1011351sm P1011350sm Farrel-200-hp-Reducer-3sm
Box Tape Sealer – Interpack Packaging System, Model USC 2020-SB, 2″ wide interchangeable tape heads. Like New Condition!
Interpak-case-sealersm P1011171sm P1011173sm P1011175sm
Machine ShopCheck Back Later
LAB & RESEARCH – Used Air Control Horizontal Laminar Flow Stations, Model 2C-630, DOM-2002, Hepa filters, work area surface is 72″ long x 23″ front-to-back. (4) available this size and (2) smaller avail. Click on any image for a larger view.
Air-Flow-3sm Air-Flow-1sm
RIVETER – Chicago Rivet & Machine, Model 912, anvil 2232, jaws 109. Click on any image for a larger view.
Chicago-1sm Chicago-3sm Chicago-4sm Chicago-2sm

Oil Heaters

(2) Sterlco Hot Oil Heaters, Models # M29016-JI & S9016-HI. One heater is shown in photo.
P1011095sm P1011096sm



Please check back at a later date


Please check back at a later date